SPECIFICATIONS

ITEM

UNIT

PH-50

PH-60

PH-70

PH-80

CAPACITY

Center height

mm (in.)

650 (25.59)

775 (30.51)

900 (35.43)

1020 (40.15)

Swing over bed

mm (in.)

1300 (51.18)

1550 (61.02)

1800 (70.86)

2050 (80.70)

Swing over cross slide

mm (in.)

985 (38.77)

1225 (48.22)

1470 (57.87)

1720 (67.71)

Swing over gap

mm (in.)

785 (30.90)

1035 (40.74)

1285 (50.59)

1535 (60.43)

Distance between centers

mm (in.)

3000(120), 4000(160), 5000(200), 6000(240), 7000(280), 8000(320), 9000(360), 10000(400), 11000(440), 12000(480)

BED

Width (W/O Auxiliary guide)

mm (in.)

1100 (43.30)

Width (W Auxiliary guide)

mm (in.)

1270 (50.00)

CARRIAGE

Cross slide travel

(Long carriage)

mm (in.)

1170 (46.06)

Cross slide travel

(Short carriage)

mm (in.)

415 (16.33)

Compound rest travel

mm (in.)

600 (23.62)

4-way tool post width

mm (in.)

310 (12.20)

THREDAD FEEDS RANGE

Longitudinal feed

mm/rev (in/rev)

0.045~2.55 (0.0018~0.1)

Cross feed

mm/rev (in/rev)

0.023~1.28 (0.0009~0.05)

Longitudinal rapid feed

mm/min (in/min)

2000 (78.74)

Cross rapid feed

mm/min (in/min)

1270 (50)

Metric thread

mm (kinds)

1~56 (60)

Inch thread

TPI (kinds)

1/2~28 (60)

Module thread

MOD (kinds)

0.25~14 (60)

Diameteral pitch thread

DP (kinds)

2~112 (60)

Pitch of leadscrew

mm (TPI)

12 (2)

TAILSTOCK

Quill diameter

mm (in.)

235 (9.25)

Quill travel

mm (in.)

200 (7.87)

Inner taper of quill

MT#6

Bearing surface on bed ways

mm (in.)

600 (25.98)

MOTOR

Main spindle motor

KW (HP)

29(40)-STD.

37(50) / 44(60) / 55(75) / 74(100)-OPT.

Coolant pump motor

KW (HP)

0.37 (0.5)