PA series
|
SPECIFICATIONS |
|||||
|
ITEM |
UNIT |
PA-35 |
PA-40 |
PA-45 |
PA-50 |
|
CAPACITY |
|||||
|
Center height |
mm (in.) |
445 (17.51) |
510 (20.07) |
575 (22.63) |
645 (25.39) |
|
Swing over bed |
mm (in.) |
880 (34.64) |
1010 (39.76) |
1135 (44.68) |
1275 (50.19) |
|
Swing over cross slide |
mm (in.) |
615 (24.21) |
745 (29.33) |
875 (34.44) |
1015 (39.96) |
|
Swing over gap |
mm (in.) |
1340 (52.75) |
1470 (57.87) |
1600 (62.99) |
1740 (68.50) |
|
Gap width from headstock |
mm (in.) |
600 (23.62) |
|||
|
Distance between centers |
mm (in.) |
1500(60), 2000(80), 3000(120), 4000(160), 5000(200), 6000(240), 7000(280), 8000(320), 9000(360), 10000(400), 11000(440), 12000(480) |
|||
|
BED |
|||||
|
Width (W/O Auxiliary guide) |
mm (in.) |
560 (22.04) |
|||
|
Width (W Auxiliary guide) |
mm (in.) |
660 (25.98) |
|||
|
CARRIAGE |
|||||
|
Cross slide travel |
mm (in.) |
670 (26.37) |
|||
|
Compound rest travel |
mm (in.) |
450 (17.71) |
|||
|
4-way tool post width |
mm (in.) |
205 (8.07) |
|||
|
THREDAD FEEDS RANGE |
|||||
|
Longitudinal feed |
mm/rev (in/rev) |
0.045~2.55 (0.0018~0.1) |
|||
|
Cross feed |
mm/rev (in/rev) |
0.023~1.28 (0.0009~0.05) |
|||
|
Longitudinal rapid feed |
mm/min (in/min) |
2000 (78.74) |
|||
|
Cross rapid feed |
mm/min (in/min) |
1270 (50) |
|||
|
Metric thread |
mm (kinds) |
1~56 (60) |
|||
|
Inch thread |
TPI (kinds) |
1/2~28 (60) |
|||
|
Module thread |
MOD (kinds) |
0.25~14 (60) |
|||
|
Diameteral pitch thread |
DP (kinds) |
2~112 (60) |
|||
|
Pitch of leadscrew |
mm (TPI) |
12 (2) |
|||
|
TAILSTOCK |
|||||
|
Quill diameter |
mm (in.) |
115 (4.52) |
|||
|
Quill travel |
mm (in.) |
200 (7.87) |
|||
|
Inner taper of quill |
|
MT#6 |
|||
|
Bearing surface on bed ways |
mm (in.) |
500 (19.68) |
|||
|
MOTOR |
|||||
|
Main spindle motor |
KW (HP) |
14(20)-STD. |
|||
|
18(25) / 22(30) 29(40)/ 37(50)-OPT. |
|||||
|
Coolant pump motor |
KW (HP) |
0.1 (0.125) |
|||
★Specifications captions are subject to change without notice for improvement.
