1VA/1VS
Unit/mm
|
ITEM/MODEL |
1VA/1VS |
|
|
Table |
||
|
Table size |
230 × 890 (9”× 35”) |
|
|
No. of T-slots |
NO. 3 |
|
|
T-slots width |
16 (0.63”) |
|
|
Slideway hardened & surface ground |
YES |
|
|
Table surface hardened & Ground |
YES |
|
|
Slideway dovetail “V” or square “SQ” |
XYZ = V |
|
|
Manual Travels |
||
|
X axis |
Manual |
610 (24.0”) |
|
Auto(Opt.) |
560 (22.0”) |
|
|
Y axis |
300 (11.8”) |
|
|
Z axis |
380 (15.0”) |
|
|
Ram |
350 (13.8”) |
|
|
Milling Head |
||
|
Motor |
3HP |
|
|
Spindle speed r.p.m. (Step Pulley) |
50HZ / 75-3800 16-Step 60HZ / 85-4350 16-Step |
|
|
Spindle speed r.p.m. (Mechanical Variable) |
50HZ/ Low range 60-420 High range 500-3600-VARIABLE 60HZ/ Low range 70-500 High range 600-4200-VARIABLE |
|
|
Spindle taper |
R8/NT30 |
|
|
Quill travel |
127(5”) |
|
|
Quill feed/spindle rev. |
0.04, 0.08, 0.015 rev. (0.0015”, 0.0031”, 0.006”) |
|
|
Quill diameter |
86(3.38”) |
|
|
Head tilt (front or back) |
45° |
|
|
Head swivel (left or right) |
90° |
|
|
Construction |
||
|
Column turret diameter |
Ø290(Ø11.42”) |
|
|
Knee width |
255(10.04”) |
|
|
Column bearing length |
335(13.19”) |
|
|
Saddle/table bearing length |
360(14.17”) |
|
|
Ram/turret bearing length |
320(12.60”) |
|
|
Ram length |
530(20.87”) |
|
|
Machine net weight |
640kgs(1410 lbs) |
|
|
● Above specifications are subject to change without prior notice. |
||
